Harvesting Rainwater with Rain Barrels, an Old Idea with a New Following
Ecology Action Center high-quality 55-gallon rain barrels are $80 each plus sales tax including local delivery during the COVID-19 pandemic. EAC members receive a discounted price. Click on this image to purchase.
Collecting rainwater for use during dry months in rain barrels or other depositories is an ancient and traditional practice. Historical records show that rainwater was collected in simple clay containers as far back as 2,000 years ago in Thailand, and throughout other areas of the world after that. With the rising price of municipal water and drought restrictions now facing much of the United States during the summer months, more and more homeowners in our own modern society are turning to the harvesting of rainwater to save money and protect this precious natural resource.
It is a common belief in many parts of the world that water is an infinite resource to exploit as needed, but as the saying goes, “you don’t know the value of water until the well is running dry.” This is especially true in arid parts of the U.S. where most of the municipal water comes from overstressed underground aquifers. Whereas rainwater is considered a renewable natural resource, many aquifers are being “mined,” that is, communities are drawing out more water than the aquifer naturally receives to recharge it.
As drought and aquifer mining begin to call attention to an increasing water crisis, people are seeking ways minimize impact on their municipal water supplies. Rain barrels can be part of the solution. Just look outside your window the next time it rains and imagine all the water that is running down your driveway being put to beneficial use in your home and garden!
Rain barrel installation
For step-by-step guidance on installing your rain barrel yourself, we recommend this video by Rutgers University. If you would prefer that your rain barrel be installed by the experts, local professionals are ready to help! Contact Midstate Gutter at 309-829-3444.
The Freshwater Facts
To illustrate how important and how limited a resource freshwater is in our world, consider the following. More than 70 percent of the Earth’s surface is covered by water, but only 2.5% of this supply is considered fresh water. The rest is found in the form of salt water in the oceans. Of the fresh water that exists, most is locked up in glaciers and ice caps. Water can also be found in the form of clouds and humidity in the soil. That leaves us 3/10 of 1 percent found in the form of lakes, rivers and streams. Unfortunately, much of this small amount of freshwater is in danger of drying up through desertification or becoming so contaminated that it cannot be used for human consumption. Changing our habits of water use can help to abate this growing problem.
Why Harvest Rainwater with Rain Barrels?
Besides helping the environment, an obvious reason for harvesting rainwater is to save money. Depending on the size of your house and the amount of rainfall in your area, you can collect a substantial amount of rainwater with a simple system. This extra water can have a significant impact on your water bill. The use of rainwater combined with the domestic use of grey water can further increase your savings. Even if you live in a rural area and have your own well, the fact that rainwater is a naturally soft water may be enough to justify harvesting rainwater. (Keep reading for information on how to calculate the potential volume of rainwater you can collect.)
Rainwater stored in rain barrels has many uses. Some people find it mostly useful for watering their landscapes and gardens. Others find uses within the house as well. Rainwater can also be used for drinking but requires special treatment with a filtration system. Note that many cities require the filtration system for drinking water to be certified and the water to be tested on a regular basis. You do not need a filtration system for landscape uses. You can use it directly from your rain barrel on your garden.
Rainwater from Rain Barrels Makes Your Garden Smile
Since the rain water is usually collected from the roofs of houses, it picks up very little contamination when it falls. You’ll of course want to keep your roof clean of debris and potential contaminants to maximize purity. The material your roof is made of is also important in how much contamination the water will carry (see Safe Rainwater Harvesting Catchments). The chemicals and hard water from many of our municipal water systems can produce an imbalance in the soil of your garden. Chemical fertilizers, fungicides, pesticides, and drought can also disrupt the balance and harmony of the soil. This imbalance causes trees and plants to weaken and makes them more susceptible to disease.
Trees and plants have an efficient immune system that allows them to fend off diseases and other invaders as long as they have a healthy soil environment and are not stressed by other factors such as drought. Trees and plants rely on fungus, bacteria, and nematodes to help them absorb the minerals and nutrients they need. Trees and plants depend on a fungal root system called mycorrhizae. Mycorrhizae attaches itself to tree and plant root hairs and extends the root hair system.
Mycorrhizae uses some of the plant’s energy, but provides the plant with minerals it cannot otherwise absorb. In healthy soil, the mycorrhizae of one tree connects with mycorrhizae of other similar trees. When you look at your garden, visualize it as a vast interconnected community of trees, plants and tiny critters that live in the soil, all interacting and affecting each other. Thus, the type of water you use in your garden will affect the health of this intricate community.
And speaking of community, one of the best reasons to start harvesting rainwater with rain barrels is that if you teach and encourage others to do the same, you will help to spread the culture of rainwater collection and in turn help your larger community and the environment. It is always important to remember that every living thing on the planet needs water to survive so we as humans must expand our idea of community to the plants and animals that surround us.
Where do I Start? Collecting Water with Rain Barrels
Harvesting systems can vary from the simple use of barrels aided by the force of gravity to deliver the water, to more advanced systems using cisterns, pumps, and flow controls. There are a few things you can do to find out what kind of rainwater harvesting system is right for you. The information presented in the rest of this website consists of a few simple steps to help you learn about rainwater collection before you buy a rain barrel or water harvesting system.
How Much Water Can You Collect in Rain Barrels During a Rainfall?
Believe it or not, for every inch of rain that falls on a catchment area of 1,000 square feet, you can expect to collect approximately 600 gallons of rainwater. Ten inches of rain falling on a 1,000 square foot catchment area will generate about 6,000 gallons of rainwater! That’s right, 6,000 gallons! More than you were expecting?
Your roof catchment area is equal to the total square feet of your house plus the extension of your eaves. You don’t need to consider the angle of your roof, like you would if you were buying roofing material, because rain falls evenly on every part of the roof.
To calculate the square feet of your house’s catchment area, measure the area of the outside walls and then include the overhang of any eaves. For example, let’s say you have an oblong house with outside dimensions of 36 feet by 46 feet. You have calculated the overhang of your eaves as 2 feet. So, add the 4 feet of the eaves to each wall length (2 eaves of 2 feet equals an additional 4 feet for each wall) to get the total length of the walls plus the eaves (40 by 50 feet).
Now multiply 40 times 50 (length times width) to get your total roof catchment area.
(36 + 4) x (46 + 4) = 2,000 sq ft
Your roof catchment area is thus 2,000 square feet.
Since one inch of rainfall provides approximately 600 gallons of water for a 1,000 square foot catchments area, and our theoretical house has a 2,000 square foot catchments area (twice the area), you will multiply 600 gallons by 2.
600 gal x 2 = 1,200 gallons
If you have an average rainfall of say 20 inches per year, you have the potential to collect 24,000 gallons of water in one year. You can use the US Weather Average Temperatures and Rainfall in US Cities Web site to get a good idea of the average rainfall in your area.
1,200 gal x 20 inches of rain = 24,000 gal
Depending on the needs of your household, that can be significant amount of water to augment your water supply.
You should consider that rainwater harvesting systems aren&8217;t necessarily 100% efficient. Most sources estimate efficiency between 70% and 90%. All rainwater harvesting systems lose some of the rainwater. The water may spill out of the gutters or the wind may blow it away. Evaporation will undoubtedly affect some of it. To maximize your collection of rainwater, you can use out buildings such as barns or sheds. If you&8217;re creative, you can even use rainwater from a patio or other paved areas around your house. Browse rain barrels at Clean Air Gardening or Rainsaver USA.
How Much Municipal Water Do I Already Use Without a Rain Barrel?
To get an idea of how using rainwater from rain barrels will impact your overall water use, you need to have some idea of how much water you currently use each year without a rain barrel. First off, track down your utility bills if you rely on municipal water. You will need to refer to them for your calculations. If you have your own well, this step will be a bit more complicated, so we will address it in the next section.
Your utility bills are usually calculated in CCF (The first ‘C’ represents the Roman numeral C, which equals 100; the second ‘C’ stands for cubic; the ‘F’ stands for feet.) One CCF equals 100 cubic feet of water, which is equivalent to 748 gallons.
If, for example, you have used a total of 110 CCF for the year, you can multiply 110 x 748 to determine the number of gallons.
110 CCF x 748 = 82,280 gal
Using our previous calculation of 24,000 gallons of rainwater collected for our theoretical house, if your current use is 82,280 gallons, it may appear that collecting rainwater would not have a significant impact. However, household usage does not change much during the year, but landscape usage will vary considerably. In many areas the largest amount of rain falls in the winter, so you probably would not immediately use the rainwater for landscaping until it gets drier. By following the steps below, you will probably see that a lot of your water usage, up to fifty percent or more, is from watering your garden during the dry months.
Check your water bills again and look at how much water you use in the rainy season. Also refer once again to the average rainfall for your area that you calculated previously. With this information in hand, you can now estimate how much water is used in the house as opposed to the landscape.
By turning on each water faucet in the house and measuring how much water comes out in a given period of time and then estimating how many minutes each faucet is used each day, you can have a pretty good idea of indoor usage. For example, turn on the water in your shower and catch it with a one-gallon container. If it fills up in thirty seconds, you know that a shower will use two gallons per minute. Now estimate the amount of time spent in the shower by members of your household.
You will also want to measure toilet water usage. You can check your toilets by turning off the supply valve and flushing the toilet. Use your one-gallon container to fill it back up. That will tell you how many gallons it uses for each flush. Multiply the number of gallons by the number of flushes per day to get your estimate. You may also want to consider changing to a lower use water tank for your toilet to save even more water. There are low-volume flush toilets available that use around a half a gallon of water per flush!
Now that you have calculated your household use as compared to your landscape use, you will see more clearly the benefits of a rain barrel for collecting rainwater. By using the 24,000 gallons of harvested rainwater during the dry season, you will greatly reduce municipal water system stress. Also, because many municipalities charge extra for high water usage during the summer, you may see additional savings during the summer months.
Types of Rainwater Harvesting Systems
There are many possible configurations and degrees of complexity to a rainwater catchment system. Costs vary considerably as well. You can spend anywhere from a few dollars to thousands of dollars. Your best bet is to review the options available on the market to find out what is in your price range and what is a realistic set-up for your home.
Perhaps the simplest use of rainwater if you are on a budget or have space restrictions is to put a rain barrel under one of the gutter downspouts and use the water on sensitive indoor plants. The plants will appreciate the soft water. The barrel should always be covered between uses.
A slightly more sophisticated system might be to use several barrels connected together near the bottom with pvc pipes or hose. A small pump can be used in one of the barrels to pump the water to your garden. In this case, all the barrels will drain simultaneously.
Bigger and more complex systems may use gravity to feed water from gutters to a larger cistern, which pumps water to the landscape. Some online gardening sites sell cisterns and other more complex rainwater harvesting equipment.
Whatever you decide, all systems should use covered barrels or cisterns that keep the water from accumulating leaves and other contaminants. They should also have some kind of filter to keep out silt and leaves. Filters can range from a funnel with mesh at the bottom that is covered by gravel, to a rainwater washing apparatus.
Safe Rainwater Harvesting Catchments
Any catchment area will pick up some contamination from leaves, bird droppings, dust, and other natural causes. This water is fine for watering your garden, but it will need a good filtering system before you can be sure it is safe to drink. Some roofs, such as old tar and gravel or old asbestos shingle roofs create too much contamination for rainwater harvesting. Treated cedar shakes are also not recommended for water harvesting.
The type of gutter system you have is also important, as many may have lead soldering or lead-based paints. Additionally, if you live in an area that produces heavy industrial pollution, your rainwater itself may contain some undesirable contaminants. Talk to your local municipal government about the issue of environmental contaminants in your area that may affect rainwater quality.
Other Safety and Maintenance Concerns
Water stored in any kind of container represents a risk for small children. Children can drown in as little just a few inches water. Additionally, animals both wild and domestic may become trapped and drown in your barrels if uncovered. Therefore, you should never use an open container for rainwater collection. Make sure you have some way to cover the barrel with a screen or a top. Standing water is also where mosquitoes breed best. As the West Nile virus and other diseases are important concerns these days, you’ll need to take appropriate measures to deter mosquitoes from breeding in your rain barrels. It only takes about ten days for mosquitoes to breed, so you should ideally empty the water in less than ten days. You should also use a fine screen over the top of the barrel so the mosquitoes cannot reach the water in the first place.
The type of barrel you use is also important. Make sure it is a food-grade container that was made to hold liquid. You cannot cut corners and simply use a trashcan because a common trashcan will not withstand the pressure of the water for long. The location of you rain barrel is also important. Make sure you place it on level and stable ground. When your rain barrel is at maximum capacity, it will weigh quite a bit and tipping is risk on un-level ground.
Depending on what part of the country you live in, we recommend disconnecting your rain barrels in the winter if temperatures in your area regularly reach freezing or below. Constant freezing and thawing of the water in your rain barrel may weaken the material or cause cracks. Store your barrels upside down in the winter to keep them clean for future use.
A final bit of advice for all rainwater catchment systems is to always monitor the rain barrels for overflow. If for example you leave for vacation for a week and have not taken precautions to avoid the overflow of water, you may end up with damage to the foundation of your home or other related problems over time.